You finally found the perfect mattress for you – an air bed. You and your family enjoy its firmer sleeping surface and adore how easy it is to fold and store it away. Everything’s going so well – your new mattress lets you sleep so well at night! But here’s the catch: a few weeks after purchasing your air mattress, you noticed that your perfect mattress seems to sag slightly day after day and you want to know why air mattress keeps deflating with no holes.
So you spent over an hour trying to find a hole so you could patch it up and enjoy your new bed again, but to your surprise, there’s no hole! Why does my air keep deflating but no holes? Indeed, that is one big question that seems to boggle the minds of many mattress owners.
For your information, a hole is not the only reason why an air mattress deflates. There are many other reasons including sharp objects.
In this article, we’ll give you a breakdown of some other possible causes behind a deflating mattress.
Continue reading to find out what these are!
Why Does Your Air Mattress Keeps Deflating With No Holes?
There are a lot of potential reasons why your air mattress keeps deflating.
If you’ve tried all the ways and can’t still find a hole, here are the other reasons you should know of:
Temperature Changes Inside the Room
Since the bed is filled with air, its size will react and respond to different temperature fluctuations.
The particles in the air are in an expanded state during higher temperatures, and those contract when the temperature goes down.
Because of this, most mattresses stay fully inflated during the daytime, but unfortunately, they may deflate a little at night when the room temperature is a lot colder.
So you see, it’s not always about having holes – temperature matters too.
How to Fix It:
Inflate your mattress at night when the temperature is already lower
In this way, the amount of air inside the mattress is enough to keep it inflated even after it contracts and condenses.
Try to minimize temperature fluctuations as much as possible
You can do this by switching on the air conditioner throughout the day so that the mattress won’t be exposed to higher temperatures.
Another good idea is to place a heater near air beds, so the air particles inside stay expanded all night long.
However, please note not to place the mattress too near the heater as extreme temperatures may melt or destroy the mattress.
If you’ll be using the air mattress outdoors, controlling the temperature can be tricky but not impossible.
One good way to do this is to use a space heater or place your tent and air bed under a shade to keep the fluctuations as minimal as possible.
Low Weight Capacity
The information that mattress users pay attention to is the mattress’ weight capacity, but this is an important consideration to keep in mind if you want your mattress to last longer.
This is because the mattress will tend to lose air (whether through its valve or its seams) once the pressure or force applied to it is way more than the weight it’s designed to accommodate.
The air loss takes place for the mattress to accommodate the unexpected displacement.
How to Fix It:
Don’t put too many things on top of the bed.
Fixing this issue is quite easy.
All you need to do is avoid putting too much things on top of your mattress.
To avoid overloading it, you should also never place heavier items than a book or a baby in your mattress.
Don’t sit on the mattress.
Even though your bodyweight coincides with the mattress’ maximum weight capacity, avoid sitting on your mattress.
This is because your weight is focused only on a small portion of the mattress, which it isn’t designed to accommodate.
Avoid overloading the mattress.
You must be mindful of the weight and quantity of people sleeping in the air beds and make sure that their total weight won’t go beyond the mattress’ maximum weight capacity.
Get a mattress with a high maximum weight capacity.
Since you can’t always weigh the people or things that will sleep or be stored on top of the mattress, it’s recommended that you invest in an air mattress with a higher maximum weight limit than what you think you need.
Stretching of the Material
If you just recently bought your inflated air mattress and you loved its firm surface but woke up to a slightly deflated bed the following day and physical change the shape, holes would surely be the first thing that would come to mind.
The good news is that isn’t the case most of the time.
You need to understand that a new mattress needs to stretch and shape itself to accommodate the sleeper’s weight.
The natural stretching of the mattress material creates a new space inside the mattress, making it look saggy and a bit deflated.
How to Fix It:
Fixing this issue is quite simple.
All you need to do is allow the mattress to stretch naturally for a few days.
You can do this by fully inflating the mattress and letting it be during the first few days – don’t lie or sit or put anything on it.
Once you notice that the bed is a bit deflated, add more air until it’s firm again.
Do this a couple of times over the next few days before you use your mattress.
Sometimes, the culprit is not a hole – it’s a leak.
And there are many types of leaks that you can encounter even when you are using a brand new air mattress.
The most common type of leak and also the most serious is a seam leak.
This can be found at the side of your bed, where the upper and lower portion of the bed is welded together.
There are many reasons why seam leaks occur – faulty design, overloading your mattress, poor quality, or wear and tear.
How to Fix It:
To be honest with you, a seam leak usually indicates the end of the life of your air mattress.
This is because it’s a bit difficult to repair.
Here are the reasons why:
- Since the seams aren’t flat, it will be hard for adhesives to stick to them.
- And even if you found a way for the adhesive to stick to the seams, the patches won’t stay in place because the seams receive the most tension when the mattress is in use.
If you detected a seam leak, you could still try to repair your bed, but it might be a better idea to get a new one to avoid any hassles.
This type of leak is rarer, but it can still happen.
By valve leaks, we are referring to the leaks surrounding the area near the pump valve.
Valve leaks occur when the valve’s material weakens due to the amount of air pressure it receives when air is pumped into the mattress.
How to Fix It:
Replace or change the affected parts.
The problem will usually lie with either the plug or the valve itself.
Fortunately, most manufacturers sell these spare parts.
So all that you need to do is identify the model number and ask the manufacturer for it.
If your air bed has a standard-sized valve, you can use a universal valve to replace it.
But if it requires a brand-specific valve, make sure to buy the replacement parts from the authorized sellers of the said brand.
If you have the budget, go for a mattress with a plug and stem seal.
This type of system is less likely to cause any leaks, but you have to shell out a few dollars more for it.
Is your air mattress deflating, but it doesn’t have holes?
Well, don’t fret! There are lots of reasons why your air mattress keeps deflating with no holes even if you are using it for the first time.
The good news is most of these reasons are easy to avoid, prevent, and fix. It is recommended to always stay away air mattresses from sharp objects.
The most important thing you have to do is properly diagnose why your air mattress keeps deflating, so you can quickly solve the issue by following the tips we’ve shared with you in this article.
Why does my inflatable mattress lose air even though there are no visible punctures or holes?
If your air mattress keeps deflating without any apparent damage, it could be due to the valves not being securely closed. Even a slightly loose valve can cause gradual air leakage, leading to the mattress deflating over time.
What are some other possible reasons for an air mattress deflating when there are no obvious leaks?
One possible cause could be temperature changes. The air inside the mattress expands and contracts with temperature fluctuations, causing it to lose some air over time. Additionally, the seams and edges of the mattress might have small leaks that are not easily visible but contribute to air loss.
Can humidity or moisture affect the inflation of an air mattress?
Yes, high humidity levels or exposure to moisture can impact the air retention of an inflatable mattress. Moisture can gradually seep into the material, compromising the airtight seal and leading to deflation. It’s important to keep the mattress dry and store it in a dry environment when not in use.
How can I prevent my air mattress from deflating even when there are no holes?
To prevent air loss, ensure that all the valves are tightly closed and check them periodically for any signs of looseness. Additionally, keep the mattress away from sharp objects or rough surfaces that can cause damage. Using a mattress protector or a thick bedsheet can provide an extra layer of protection against punctures.
Is there any maintenance I should perform to prolong the lifespan of my air mattress and prevent deflation?
Yes, regular maintenance can help prevent deflation. Inflate the mattress to its recommended firmness and periodically check for any visible damage, paying close attention to the seams. Clean the surface of the mattress and store it properly when not in use, ensuring it is completely dry. Following the manufacturer’s instructions for maintenance and storage can significantly extend the lifespan of your air mattress.